Scandomestic SV 10 Series, User Manual

Page: 22 / 69

of wine.
•
Place your Wine cooler on a floor that is strong enough to sup-
port it when it is fully loaded. To level your Wine cooler, adjust the
front leveling leg at the bottom of the Wine cooler.
•
This appliance is using flammability refrigerant. So never dam-
age the cooling pipe work during the transportation.
•
Locate the Wine cooler away from direct sunlight and sources of
heat (stove, heater, radiator, etc.). Direct sunlight may affect the
acrylic coating and heat sources may increase electrical consump-
tion. Extreme cold ambient temperatures may also cause the unit
not to perform properly.
•
Avoid locating the unit in moist areas.
•
Plug the Wine cooler into an exclusive, properly installed-
grounded wall outlet. Do not under any circumstances cut or re-
move the third (ground) prong from the power cord. Any ques-
tions concerning power and/or grounding should be directed to-
ward a certified electrician or an authorized Products service cen-
ter.
•
Door handles, door hinges, trays, and baskets for a minimum pe-
riod of seven years and door gaskets for a minimum period of 10
year, after placing the last unit of the model on the market.
•
Thermostats, temperature sensors, printed circuit boards and
light sources are available for a minimum period of seven years
after placing the last unit of the model on the market.
Attention
•
The device is intended exclusively for the storage of wine.
•
Store wine in sealed bottles;
•
Do not overload the cabinet;
•
Do not open the door unless necessary;