Internal LED lights
In order to reduce energy consumption,
this wine cabinet will automatically switch
off the LED lights after 10 minutes.
If you want the LED light to remain on con-
tinuously, this is possible. Please press and
hold the “LIGHT” button for 5 seconds, the
display will show “LP”. After 4 seconds the
display will revert back to normal, and the
light will remain on until manually
switched off. If you want to revert back and
conserve energy (recommended), please
press and hold the “LIGHT” button for 5
second, the display will show “LF”, after 4
seconds the display will revert back to nor-
mal, and the light will automatically switch
off after 10 minutes.
OPERATING YOUR
WINE COOLER
For SV 10-series, SV 80-series
and SV 90-series
The controls of your wine Cooler
•
“RUN”
- Indicator light illuminates to
signify the cooling mode is currently in
operation.
•
“LIGHT”: control the inner
light turn
on/off.
•
“POWER”: control this appliance turn
on/off (press and hold this button for
approximately 3 seconds).
•
“DISPLAY”: shows the temperature of
the internal cabinet.
•
“
UP
”
: Used to raise(warm) the
temperature in 1°C.
•
“DOWN”: Used to lower(cool)
the
temperature in 1°C.
Temperature Controls Model SV 80-series
•
If the power is suddenly lost, the set
temperature will be saved by the unit.
Once the power is back on, the unit
will be at the same set temperature.
•
Set the desired cooling temperature
by pressing the buttons adjacent to
the “UP/DOWN” indicators. Each de-
pression of the buttons will scroll
through the available temperature
setting in increments of 1 degree.
•
The temperature setting can be ad-
justed from 5°C -18°C
•
To view the actual temperature at any
time press and hold the temperature
adjustment button (up or down) for
approximately 5 seconds, the actual
temperature will temporarily flash in
the LED display for 5 seconds. After
this it will revert back to the set tem-
perature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature.
Temperature Controls
Model SV 90-series
•
Each cooling compartment of the
wine cooler/beverage cooler (Left &
Right) is independently controlled.
•
To set the temperature:
•
If the power is suddenly lost, the set
temperature will be saved by the unit.
Once the power is back on, the unit
will be at the same set temperature.
•
Set the desired cooling temperature
by pressing the buttons adjacent to
the “UP/DOWN” program. Each de-
pression of the buttons will scroll
through the available temperature
settings (for each compartment) in in-
crements of 1 degree. The tempera-
ture selected will flash in the LED dis-
play for approximately 5 seconds,
then revert back to display the setting
temperature of the cabinet.
Summary of Contents for SV 10 Series
Page 30: ......