•
Both compartments: The tempera-
ture setting can be adjusted from 5°C
~18°C.
To view the actual temperature, (anytime)
press and hold the corresponding button
for approximately 5 seconds, the actual
temperature will
temporarily” flash” in the
LED display for 5 seconds.
For SV 85-series,100-series, SV
120-series
The controls of your wine Cooler
SV 110-series
•
“RUN”: Indicator light illuminates to
signify the cooling mode is currently in
operation.
•
“Light”: control the inner light turn
on/off.
•
“Power”:
control this appliance turn
on/off.
•
“Set Upper”: set the temperature of
the upper chamber.
•
“Set Lower”: set the temperature of
the lower chamber.
•
“Up chamber”: shows the tempera-
ture of the up chamber.
•
“Lower chamber”: shows the temper-
ature of the lower chamber.
•
“TEMP SET”: shows the temperature.
Setting the Temperature Control
•
Each cooling compartment of the
wine cooler (upper & lower) is inde-
pendently controlled.
•
If the power is suddenly lost, the set
temperature will be saved by the unit.
Once the power is back on, the unit
will be at the same set temperature.
•
Temperature alarm: If the inner tem-
perature is higher than 23°C, the “HI”
is shown in the display panel, and the
buzzer alarm after one hour continu-
ously. It informs that the inner tem-
perature is too high, please check the
reason.
•
Set the desired cooling temperature
by pressing the buttons adjacent to
the “set upper/set lower” program.
Each depression of the buttons will
scroll through the available tempera-
ture settings (for each compartment)
in increments of 1 degree.
•
The temperature selected will flash in
the LED display for ap- proximately 5
seconds, then revert to display the
setting temperature of the cabinet.
•
Both compartment: The temperature
setting can be adjusted from 5°C to
18°C.
•
To view the actual temperature. (any-
time) press and hold the correspond-
ing button for approximately 5 sec-
onds, the actual temperature will
temporarily “flash” in the LED display
for 5 seconds.
For SV 130-series
The controls of your Wine cooler (the up-
per zone and middle zone)
•
“RUN”: Indicator light illuminates to
signify the cooling mode is currently in
operation.
•
“Light”: control the inner light turn
on/off.
Summary of Contents for SV 10 Series
Page 30: ......