the normal use of drawers and normal access of foods are affected by frosting, make sure to remove the frosts in a timely
manner. Follow the following steps to remove frosts:
1. Take out the frozen foods, shut off the mains power supply, open the refrigerator door, and gently remove the frosts
from the inner wall with an ice scraper. To speed up the thawing process, you are suggested to place a bowl of hot water
inside the refrigerator/freezer, and when the solid ice frosts become loose, use an ice scraper to scrape them off and then
take them out.
2. After defrosting, clean the refrigerator/freezer inside, and switch on the power supply.
Changing the light
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case
of any abnormality, please contact the after-sales personnel for visiting service.The lamps can only be replaced by the
manufacturer,together with a part of the appliance.
Lamp type
：
LED light.
Energy efficiency level
：
E
Note: Electric shock and fire accident may be caused in case the power cord and plugs damaged or stained
by dust. If any abnormality, please unplug the power plug and get in contact with the vendor.
VIII.
Simple fault analysis and elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can try
to solve the problem.
Case
Inspection
Solutions
•
Completely
non-refrigeration
•
Is power plug off?
•
Are breakers and fuses a broken?
•
No electricity or line trip?
•
Re-plug.
•
Opening the door and checking whether the
lamp is lit.
•
Abnormal noise
•
Is refrigerator stable?
•
Does refrigerator reach the wall?
•
Adjusting refrigerator's adjustable feet.
•
Off the wall.
•
Poor
refrigerating
efficiency
•
Do you put hot food or too much food?
•
Do you open the door frequently?
•
Do you clip food bag to the seal of door?
•
Direct sunlight or near a furnace or stove?
•
Is it well-ventilated?
•
Temperature setting in too high?
•
Putting food into refrigerator when hot food
becomes cool.
•
Checking and closing the door.
•
Removing the refrigerator from the heat
source.
•
Emptying the distance to maintain good
ventilation.
•
Setting to the appropriate temperature.
•
Peculiar smell in
refrigerator
•
Any spoiled food?
•
Do you need to clean refrigerator?
•
Do you pack food of strong flavors?
•
Throwing away spoiled food.
•
Cleaning refrigerator.
•
Packing food of strong flavors.
Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where your
purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the
appliance, leaving the door ajar to prevent unpleasant smells.
IX.
Certifications
Electrical information
This electrical appliance must be grounded
This product is equipped with a plug, which is suitable for all houses equipped with sockets meeting the current
specifications
If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible
shock hazard, do not insert the discarded plug into a socket.
This product complies the EEC directives.
X.
Safe recovery instructions
Disposal
Old appliances still have some surplus value. An environmentally friendly approach will ensure that valuable raw materials
are recycled.
The refrigerants used in your equipment and insulation materials require special handling procedures. Make sure there is
no pipe damage on the back of the equipment before handling.
Up-to-date information on the options for disposing of old equipment and packaging from old equipment can be obtained
