Installation
Mounting of The V-Flap
If the cooker hood does not have an assembled V-flap 1, you should
mount the half-parts to its body. The images only show an example of
how to mount the V-flap, because the outlet may vary according to dif-
ferent models and configurations.
To mount the V-flap 1 you should:
•
Mount two half-parts 2 into the body 6;
•
The pin 3 should be top oriented;
•
The axis 4 should be inserted into the holes 5 on the body;
•
Repeat all the operations for the 2nd half-part.
If you have an outlet to the outside, your cooker hood can be connected
as below picture by means of an extraction duct (enamel, aluminum,
flexible pipe or non-flammable material with an interior diameter of
150mm)
1.
Before installation, turn the unit off and unplug it from the
outlet.
2.
The cooker hood should be placed at a distance of 50~65cm
above the cooking surface for best effect. See pic 1.
Inside chimney bracket
1.
After decide the cooker hood height, measure the position
of the holes for hanging hood and inside chimney bracket.
Drill 4
φ8
holes, 2 for inside chimney bracket and 2 for
hanging the hood,and keep the hood level. The fixed
position of the inside chimney bracket is the highest place
of inside chimney. See pic 2.
2.
Screw 2 pcs ST4 x 30mm screws on the wall with wall plugs
to fix the hood,then use 2 pcs ST4 x 40mm screws to fix the
inside chimney bracket. See pic 2.
3.
Install the v-flap and expansion pipe onto the cooker hood.
Fix the expansion pipe on the outlet with a cable tie. See pic
3. Note: The expansion pipe is not included in this product.
