TBOXINDS1
–
User Guide, Rev. 0.4
6 |
P a g e
User Guide
8.
Safety Instructions
As a precaution and in case of danger, the power connector must be easily accessible. The
power connector is the product’s main disconnect
for the device.
Warning
All operations on this product must be carried out by good skilled personnel only.
Electric Shock
Before installing a Scalys product into a system always ensure that your main power is
switched off. Serious electrical shock hazards can exist during all installation, repair, and
maintenance operations on this product. Therefore, always unplug the main power cable and
any other cables which provide external voltages before performing any work on this
product.
9.
ESD
Electronic board inside the TrustBox and their components are sensitive to static electricity.
Therefore, care must be taken during all handling operations and inspections of this product,
in order to ensure product integrity always.
Do not handle this product out of its protective enclosure while it is not used for operational
purposes unless it is otherwise protected. Whenever possible, unpack or pack this product
only at EOS/ESD safe workstations. Where a safe workstation is not guaranteed, it is
important for the user to be electrically discharged before touching the product with his/her
hands or tools.
The easiest way to do this is by touching a metal part of your system housing. It is
particularly important to observe standard anti-static precautions when changing add-on
boards, jumper settings etc.