Scales USA ACS001AC User Manual Download Page 16

SCALES usa © 2005

Page

16 of 16

SCALES USA  Warranty Information

Thank you for purchasing DigiWeighPro.

The ACS A/C scale comes with a 1

-year 

warranty. If you need service for 

your scale, please email your request to our customer service center at 
[email protected] or fax it to 206-600-1777

Also you can log on our 

website at www.scalesusa.com and contact us through our customer service 
page.

This warranty will cover all defective scales within their warranty period. You 
must provide a copy of 

your receipt. 

This warranty will be void if the scale 

has been damaged due to misuse, physical abuse, accident, unauthorized 
service, or other cause not arising out of defects in materials or workmanship.

During the one year warranty period, if your scale fails to work properly when 
used under normal conditions, Scales USA will repair, or at our option, 
replace it without charge. The Scales USA user has to pay the shipping 
charge to send the defective scale 

with the receipt of purchasing

back to 

us and we will pay the cost of shipping to return the repaired or replaced 
scale to user. There are 

no other charges to the consumer for warranty 

coverage other than the shipping cost back to the manufacturer.

Our USA service center address is:

Scales USA

10306 E. Dunn Rd

Chattaroy, WA 99003

USA

Scales USA will provide the best quality scales and customer service for our 
entire satisfied customers and appreciate your business!

Thank you for your business!

The Scales USA customer service staff.

Summary of Contents for ACS001AC

















Reviews: