SCALES usa © 2005
Page
13 of 16
7. To disable the Alarm/ Beep function, Press
QUANTITY CHECK /
ZERO/ M+.
ACCUMULATED TOTAL COUNT
When counting large quantities, it is more accurate to count in smaller
batches rather than one huge batch. Up to 99 batches can be counted and
added to the internal scale memory. This allows the operator to keep a
running total.
The count can be added to the memory as follows
1. Press the
M+
key. The "Weight" display will show the number of times
that items have been added to the accumulation memory, and the
“
Count
”
display will show the total number of items in memory. Press
the
CE
key to return to counting.
2. Additional product can then be weighed or counted and the
M+
key
pressed again. This can continue for up to 99 entries, or until the
weight capacity is reached.
3. To observe the total stored press the
TOTAL
key.
4. To clear the memory press
TOTAL
and then
QUANTITY CHECK
to
clear all values from memory.
BATTERY OPERATION
The scales can be operated from the internal rechargeable battery if desired.
The battery life is approximately 70 hours. When the battery needs charging
the low battery symbol will be displayed, the battery should be recharged
immediately. The scale will still operate for about 10 hours after which it will
automatically switch off to protect the battery. To charge the battery, simply
plug the AC Adapter into the scale and the AC power outlet. The charge LED
on the front panel is red when battery is discharged and changes to yellow
while the battery is charging, and to green when battery is charged. The
scale does not need to be turned on. The battery should be charged for 12
hours for full capacity. When the battery life becomes unacceptable then
obtain a sealed lead acid replacement battery of the same type and capacity.