DOMA031EN v1_06-2014– Radio-transparent stretchers user manual
Page 6 / 24
Slide the loop end in the black loop
Pull the end of the loop to insure a good
mounting.
Repeat the operation with the four loops.
Mounting and locking the stretcher halves
The locking system allows a secure assembly of the two halves of the stretcher.
The locking system cannot be unlocked or disassembled once the stretcher is hanging on the
hoist spreader bar.
Unpack the stretcher, remove all the protection parts.
Lay down the parts of the stretcher on a flat area in order to facilitate the assembly
The two operators position the two halves face to face : refer to the labels indicating the foot
end.
Lock the stretcher’s parts :
After positioning the
male part face to the
female part press the
lock pin
Insert the male part, so
that the pin is blocked
in its housing
The safety ring prevents
the accidental unlocking
of the stretcher
The system is locked
Locking is automatic: a "click" sound accompanies the lock; the locking ball must be visible
through the locking ring.