background image

 

DOMA019EN v8_10-2015– Shado

®

 User Manual        

   

 

 

 Page 21 / 24             

 

 
 
Shado

®  

tray,  mattress and cushion specification

 

 
Material 

 

The tray of the 

Shado

®

 

is made out of a material with properties ideally suited to intensive use: PVC. 

This is a flat panel manufactured by extrusion, completely homogeneous and nonporous. 
The mattress is made of polyurethane foam coated with protective PVC fabric. 

 
Humidity resistance  
 
PVC is versatile and ideally suited for wet areas. 
Thanks to its very dense and homogeneous composition, PVC gives the tray and the mattress of the 
Shado

®

 an exceptional resistance  to moisture. The material is resistant to mildew and rot, as for the 

heart than to its surface. 
 
Impact and scratch resistance 
 

The tray of 

Shado

® 

has excellent flexural strength and impact resistance. 

It is for heavy use and has exceptional resistance to scratching. 
 

 

Fire resistance 

 
The tray has an excellent resistance to fire: the material does not melt, does not drip, does not explode under 
the effect of flame or heat and remains stable for very long. 
The tray material was classified M2 / F0 by an accredited laboratory. 
The mattress and cushion are also classified M2, and conform to the BS7177 standard, level of protection 
"medium" ( BS7177 is a standard relating to resistance to ignition for bed mattresses). 

 
 

Chemical resistance 

 
PVC  has  excellent  resistance  to  chemical  products  and  some  solvents.  In  doubt,  consult  the 
product data sheet on its compatibility with PVC, and try it on a small area before use. 
The panel is also resistant to dyes, disinfectants and cleaning chemicals, even if frequent use of 
acids. They do not alter or properties or appearance.. 
 

Biocompatibility

 
PVC  is  approved  for  human  consumption  and medical,  so  contact  with  the  skin  is  allowed  without 
any risk of allergic reaction. 
 
Ease of maintenance 
 
The closed surface and non-porous structure of the panel surface prevents the adhesion of dust and 
dirt, and facilitates maintenance. 
The  remarkable  durability,  resistance  to  abrasion,  moisture,  and  chemicals  allows  an  easy 
maintenance. 
Easily cleaned using conventional cleaning products, it also supports the application of aggressive 
disinfectants due to its excellent chemical resistance. 
Dirty trays can be easily cleaned using an organic solvent without alteration.  

 

Summary of Contents for Shado

























Reviews: