![background image](http://html1.mh-extra.com/html/scag-power-equipment/swzv/swzv_operators-manual_1205937032.webp)
28
Section 7
+
Compatible Greases:
Mobilix #2 found at Mobil Service Stations
Timken Lithium Multi-Use #2 found at industrial shops
Shell Alvania #2 found at Shell Service Stations
Lidok EP #2 found at industrial shops
MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS (CONT'D)
HOURS
Break-In
8
40
100 200 500
Procedure
Comments
(First 10)
X
Apply grease to fittings
See paragraph 7.2
X
Check hardware for tightness
X
Change engine oil filter
See paragraph 7.4
X
Check hydraulic oil level
See paragraph 7.3
X
Replace engine fuel filter
See paragraph 7.5
X
Drain hydraulic system and
See paragraph 7.3
replace hydraulic oil
Use SAE 20W50
Oil
X
Replace hydraulic oil filter
See paragraph 7.3
7.2 LUBRICATION - GREASE FITTING LUBRICATION CHART
(SEE FIGURE 7-1, PAGE 27)
LUBRICATION
NO. OF
LOCATION
INTERVAL
LUBRICANT
PLACES
1
Caster Wheel Pivot
100 Hours/Bi-Weekly
Chassis Grease
2
2
Caster Wheel Bearings
100 Hours/Bi-Weekly
Chassis Grease
2
3
Brake Actuator
200 Hours/Monthly
Chassis Grease
2
4
Cutter Deck Spindle
40 Hours/Weekly
+Lithium MP White Grease 2125
2/3
5
Cutter Deck Pusharms
100 Hours/Bi-Weekly
Chassis Grease
2