![background image](http://html1.mh-extra.com/html/scag-power-equipment/stt61v-27ch-ss/stt61v-27ch-ss_operators-manual_1205884025.webp)
Section 5
21
Uneven Cut on Flat
Lift worn from blade
Replace blade
Ground - Wavy
High-Low
Blade upside down
Mount with cutting edge toward
Appearance,
ground
Scalloped
Cut, or
Rough Contour
Deck plugged, grass accumulation
Clean underside of deck
Too much blade angle (deck pitch)
Adjust pitch and level
Deck mounted improperly
See your authorized SCAG dealer
Bent spindle area
See your authorized SCAG dealer
Dull blade
Sharpen blade
TROUBLESHOOTING (CONT'D)
Sloping Ridge Across
Tire pressures not equal
Check and adjust tire pressure
Width of Cutting Path
Wheels uneven
Check and adjust tire pressure
Deck mounted incorrectly
See your authorized SCAG dealer
Deck not level side-to side
Check for level and correct
CONDITION
CAUSE
CURE
Uneven Cut on
Uneven ground
May need to reduce ground speed,
Uneven Ground -
raise cutting height, and/or change
Wavy Appearance,
direction of cut
High-LowScalloped
Cut, or Rough Contour
Width of Deck
SGB020
Width of Deck
SGB021
Width of Deck
SGB023