background image

 WARNING

FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT 

IN SERIOUS INJURY OR DEATH.

•  Read this manual completely as well as other manuals that came with your blower.
•  ALWAYS FOLLOW OSHA APPROVED OPERATION.
•  Become familiar with the safe operation of the equipment, operator controls, and 

safety signs.

•  DO NOT operate on steep slopes. 
•  Always travel across slopes.
•  Keep all shields in place.
•  Before performing any maintenance or service, stop the machine and remove the 

spark plug wire(s).

•  If a mechanism becomes clogged, stop the engine before cleaning.
•  Keep hands, feet and clothing away from power-driven parts.

REMEMBER - YOUR BLOWER IS ONLY AS SAFE AS THE OPERATOR!

HAZARD CONTROL AND ACCIDENT PREVENTION ARE DEPENDENT UPON THE AWARENESS, 
CONCERN, PRUDENCE, AND PROPER TRAINING OF THE PERSONNEL INVOLVED IN THE 
OPERATION, TRANSPORT, MAINTENANCE, AND STORAGE OF THE EQUIPMENT.

This manual covers the operating instructions and illustrated parts list for:

LBX15-BV10

with a serial number of

P4500001 to P4599999

LBX15-GX270

with a serial number of

P4600001 to P4699999

Always use the entire serial number listed on the serial number tag when referring to this product.

Summary of Contents for EXTREME LBX15-BV10
























Reviews: