manualshive.com logo in svg

Scag Power Equipment Cheetah SCZ48V-22FX, Operator'S Manual

Share
Download
Scag Power Equipment Cheetah SCZ48V-22FX Operator'S Manual Download Page 14

10

R

Section 3

SPECIFICATIONS

ENGINE

3.1 

General Type ................................................................................................Heavy Duty Industrial/Commercial Gasoline
Engine Model:

Scag Model SCZ48V-691FX ...........................................................................................................Kawasaki FX691V
Scag Model SCZ52V-730FX ...........................................................................................................Kawasaki FX730V

Displacement:

Kawasaki 691FX ................................................................................................................................................ 726cc
Kawasaki 730FX ................................................................................................................................................ 726cc

Type:

Kawasaki (FX) ......................................................................4-Cycle, Air-Cooled, Naturally Aspirated Gasoline, OHV

Cylinders ..................................................................................................................................... 2 with Cast Iron Sleeves
Governor ........................................................................Mechanical Type with Variable Speed Control Set At 3600 RPM
Idle Speed

Kawasaki ..................................................................................................................................................... 1400 RPM

Carburation:

Kawasaki (FX) ............................................................................................................ Fixed Jet Downdraft Carburetor

Fuel Pump:

Kawasaki (FX) ....................................................................................................... Mechanical with In-Line Fuel Filter

Fuel ...................................................................................... Non-Leaded Gasoline with a Minimum Octane Rating of 87
Oil Pump ...........................................................................................................................Full Pressure w/Full-Flow Filter
Starter ........................................................................................................................ Electric Starting with Solenoid Shift
Belts .................................................................................................................Kevlar cord. Self-adjusting, Self-tightening

ELECTRICAL

3.2 

Battery .................................................................................................................................................................... 12 Volt
Charging System ............................................................................................................................................... Alternator
Charging Output:

Kawasaki .............................................................................................................................................12 Volt, 20 Amp

System Polarity .......................................................................................................................................Negative Ground
Interlock Switches ....................................................... Seat, Neutral Control, Mower Engagement (BBC), Parking Brake
Instrument Panel ......................................Ammeter, Key Switch, Throttle Lever, Manual Choke, BBC Switch and Fuses
Fuses ........................................................................................................................................................Two (2) 20 Amp

POWER HEAD

3.3 

Drive System .......................................................... Hydraulic Drive with Two  Hydro-Gear™ Integrated Zero-Turn Axles

Scag Model (SCZ) ....................................................................................................................Hydro-Gear™ ZT-3400

Steering/Travel Control ...........................................................................................Twin Lever Fingertip Steering Control 
 

with Individual Control to Each Wheel with Gas Spring Dampers

Parking Brake .......................................................... Foot Pedal Actuated Linkage to Brakes on Both Drive Wheel Axles
Wheels:

(2) Front Caster -  ..........................................................................................................................................13 X 6.50
(2) Drive -  ........................................................................... 23 X 9.5-12 Four-Ply Pneumatic Tubeless, Radius Edge

Tire Pressure:

Front Caster....................................................................................................................................................Flat Free
Drive .................................................................................................................................................................. 12 PSI

Fuel Tank .........10-Gallon Total Capacity, (Dual) Seamless Roto-Low-Perm Tanks with Large Opening and Fuel Gauge 
Seat ........................................................................................... Padded, Thick Cushion with Tall Back Rest and Recline
Travel Speed.
Forward.................................................................................................................................................. 0 up to 10.5 MPH
Reverse ...................................................................................................................................................... 0 up to 5 MPH
-NOTE- The machine will travel up to 10.5 mph for transport purposes. For best cutting performance the forward travel 
speed should be adjusted depending upon the cutting conditions.

Summary of Contents for Cheetah SCZ48V-22FX















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands