Page 43
【
PPPoE setup
】
Picture4.19 PPPOE
Input the user name and password that ISP
（
Internet service provider
）
provides. After saving it
reboot up your system. Then the DVR will build a network connection based on PPPoE. The IP address
will change into dynamic IP address after above operation is well done.
Operation
：
After PPPoE dialing successfully look up the IP address in the [IP address] and obtain the
current IP address. Then use this IP address to visit the DVR through user port.
【
NTP setup
】
Picture 4.20 NTP
The NTP server must be installed in the PC.
Host computer IP:
Input the IP address installed NTP server.
Port:
Default: 123. You can set the port according to NTP server.
Time zone:
London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi GMT
+5 Bangkok GMT +7 Hongkong Beijing GMT +8 Tokyo GMT +9 Sydney GMT +10 Hawaii
GMT-10 Alaska GMT-9 Pacific time GMT-8 American mountain time GMT-7 American mid time
GMT-6 American eastern time GMT-5 Atlantic time GMT-4 Brazil GMT-3 Atlantic mid time GMT-2.
