6
CLEANING AND MAINTENANCE
For blender
The Auto Clean feature can clean the blender and blade assembly easily,
rapidly in complete safety.
-
Pour a little warm soapy water into the Jar and turn the Speed Selector to P
position for a few seconds.
-
Remove the Jar and rinse under running water.
-
Wiping the outer surface of Motor Unit with a damp cloth, do not use
abrasive cleansers. Never immerse in water for cleaning
-
Dry all parts and then replace them
If any problem has been encountered during use never disassemble the Motor
Base by yourself, no user serviceable parts inside. Contact only the authorized
service facility for examination and repair.
For chopper
1. Use a brush to clean the Cup, and the Cup Base; Do not immerse the Cup
Base in water; and be careful the blade is sharp!
Note: Generally, disassemble the Cup base from the Cup.
2. Never immerse the motor base into water for cleaning. Wipe the outer
surface with damp cloth.
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste disposal
center.
