5
9. Press down Control Knob along surface of handle then turn Top cover
counterclockwise, take down it, pour and serve.
SBOSE® CHOPPER OPERATION
1. Place the motor base on the flat horizontal surface and
make sure it is unplugged.
2. Fill the Cup with coffee beans, the quantity of coffee
beans shall not exceed 30g
3. Then assemble the Cup Base by turn it in anticlockwise,
until the Cup Base screwed tightly into the cup (See Fig
4); then assemble the Cup Unit assembly into the motor
unit, so that the Cup base is locked into the groove of
motor unit by turn the assembly in clockwise. The
position is a safety interlock device. ( see fig.5)
4. You can turn the speed selector to the desired setting or
hold on the “M” position if want to accelerate the
process of blending.
Note: The appliance allows you to chop the maximum
quantity of coffee beans is 30g. Do not overfill the Cup.
5. Allow the blade stop running before removing the Cup
Unit.
6. Disconnect the supply once finished. Disassemble the Cup Unit and remove
the Cup Base. Then empty the bowl and serve. Careful the Cup is under the
Cup base when disassembled the Cup Base from the Cup to avoid the
powder splashed.
7. Do not run the SBOSE® appliance for more than 1 minutes per time.
Minimum 5 minutes rest period is required between two consecutive cycles.
WARNING:
1. Never operate the SBOSE® appliance more than 15 seconds per time
without loaded.
2. Blades are very sharp. Handle with care.
Fig 4
Fig 5
