SBC SBC-368, Owner'S Manual Installation And Operating Instructions

Page: 38 / 53

37
CALL WAITING ID OPTIONS
If you have subscribed the Call Waiting and Call Waiting ID Options from your local
telephone company, you will hear a Call Waiting tone when a new call comes in
while you are talking. You can either alternate between calls or disposition the call.
Call Waiting ID Options Set to OFF
If there is an incoming call during a conversation, the
Caller ID Call Waiting information appears on the
display. Press [ANS] to answer the Call Waiting
party and put the first call on hold.
You can press [Flash] to switch between calls.
Call Waiting ID Options Set to ON
If there is an incoming call during a conversation, all
the five labels for Call Waiting ID Options features will
be automatically shown at the bottom of the display.
When you hear the Call Waiting tone, press the
corresponding softkey to apply a disposition to the
call.
Note:
You must disposition the call within 26 seconds of the Call Waiting tone.
[HOLD]: Place the waiting call on hold and send a hold announcement.
[DROP ANS]: End the first call and answer the waiting call.
[JOIN]: Add the waiting call to your first call.
[SAY BUSY]: Play a pre-recorded message from your phone company that the line
is busy and end the waiting call.
[SEND V.M.]: Forward the waiting call to your voice mail or answering service
Tip: Call Waiting ID Options may not be available in all areas. Contact your local
telephone company for details.
JOHN SMITH
123-123-4568
ANS
PHONE ON
F
3WAY
SERVICE
JOHN SMITH
123-123-4568
HOLD DROP JOIN SAY BUSY SEND V.M.
PHONE ON
3WAY
SERVICE
C A L L E R I D O P E R AT I O N