18
REGISTRATION OF HANDSET
The first registered handset will be automatically assigned as HS-1 to the base unit.
When additional handsets are registered to the system, they will be assigned
extension numbers in the following sequence: HS-2, HS-3, and up to HS-8.
On the Base Unit:
Press [MENU] and “REGISTRATION” appears on the
display.
Press [OK] and “WAITING REGISTER” is displayed.
You are now ready to register your handset.
Note:
The base unit will return to standby mode if no
handset registration takes place within 25 seconds.
On the Handset:
After the handset is charged, remove it from the
base unit. “HS_ _” is displayed
Press [MENU] and “REGISTRATION” appears on
the display.
Press [OK] and select “ADD A HANDSET?”.
Press [OK] to register and “CONNECTING” is
displayed for 1 to 2 seconds.
If the handset displays “REG OK NEW ID=1”, the
connection with the base unit is established.
If the handset displays “NO CONNECTION”, repeat
the above steps all over again.
REGISTRATION
OK EXIT
WAITING REGISTER
EXIT
NO NEW CALL
HS_ _
SAVE MENU SERVICE DIR. DIAL V.M.
REGISTRATION
HS_ _
OK EXIT
ADD A HANDSET?
OK EXIT
REG OK NEW ID=1
G E T T I N G S TA R T E D
Summary of Contents for SBC-368
Page 10: ...9...
Page 51: ...50 NOTES...
Page 52: ...51 NOTES...
Page 53: ...52 SBC3681HS 20030913...
