6-13
Saia-Burgess Controls AG
27-621 ENG07 – Manual – Web Panel MB - PCD7.D450WTPx and PCD7.W470WTPx
Internal special functions
Handling: precautionary measures
7
Config
file
entry
Container
(source HN 10.03.10)
Type
Default
Min
value
Min length
Max
value
Max
length
Description
R/W
uBT_TCPIP
Addr
String IP
address
0xC0
A8 0C 5A:
192.168 12.90
*
*
Read/write the
TCP/IP
address of the terminal (own address) within the subnet being
used.
* If the setting is changed, a restart is required.
This will mean FTP
connections are lost.
No
uBT_IsTSPresent
Decimal value string
Current value
0
255
Touchscreen was detected (1).
If the value is 0, calibration will be skipped during startup.
R/W
uBT_LcdContrast
Decimal value string
10
0
20: 100%
Contrast and brightness setting for the backlight (0:20). Increasing the value means greater brightness.
R/W
uBT_LocalFileSearch
Decimal list string
Local before remote (1)
0
2
Search mode for local file search 0: Do not search local files 1: Search local files before remote files 2: Search remote files before local files
No
uBT_MACAddr
ANSI text string
0
20
Own MAC address (read, only)
No
uBT_MultiKeyV
alue
ANSI text string
0
0
1
Container is not available
External SIP
keyboard multikey display (1).
At 0: multikey combinations not activated
R/W
uBT_S-BusAddr
Decimal value string
10
0
253
Own S-Bus address
R/W
uBT_ ScaleMode
Decimal list string
Auto (0)
0
2
Setting for upscaling mode Auto (0): Smaller views are automatically adapted to the size of the terminal screen, one
view at a time. QVGA
views are enlarged to the full screen size of VGA
terminals (2x
horizontal and vertical zoom with pixel doubling). VGA
(1): Forced position for VGA
without upscaling of smaller views.
This is why upscal
-
ing is switched of
f on VGA
terminals. QVGA
(2): Force upscaling with pixel doubling on VGA
terminals.
The setting takes ef
fect on the next view jump, URL
jump, or after a restart.
Read only
uBT_SerialNumber
Hex. or dec.
0
8
Serial number (read, only)
No
uBT_Setup
Text
-
-
-
Enter "show” (pay attention to upper/lowercase).
A pop-up window opens on the terminal
containing the Setup menu.
R/W
uBT_SubNetMask
String IP
address
0xFF FF FF 00
*
*
Read/write subnet mask of the subnet used by the terminal. * If a change is made, a restart will be necessary
.
This will mean FTP
connections are lost.
Read only
uBT_V
ersion
ANSI text string
Current version string
0
32
Firmware version String read, only
R/W
uBT_RtcDate
ANSI text string
The date is obtained from the real time clock on the MB panel. (Real
Time Clock (R
TC)
must be activated in the Setup menu)
R/W
uBT_RtcT
ime
ANSI text string
The time is obtained from the real time clock on the MB panel. (Real
Time Clock (R
TC)
must be activated in the Setup menu)
*: In general, IPv4 private addresses are used.
The default settings are:
- 1 x
A class with subnet mask 10.x.x.x and mask 255.0.0.0 – sections can also be used.
- 16 x B class with subnet mask 172.16.x.x to 172.31.x.x and mask 255.255.0.0 – sections or combinations can also be used. - Or 256 x C class with subnet mask 192.168.0.x to 192.168.255.x and mask 255.255.255.0 - combinations can also be used.
