Saia-Burgess Controls AG
User Manual Standby System
│
Document 27-645
│
Edition E
NG 02
│
2017-04-26
Configuration
Diagnostic
2-12
2
With the “Separate symbol files” option selected:
Standby System Enabled checkbox
Enables or disables the standby feature for the project.
Symbol files for data transfer between CPUs
Depending on your application, you can use either one or three symbol files for
defining the media to be transferred between CPU0 and CPU1 of each device,
and between the two devices. See
for more details.
Primary Device (CPU0)
This is CPU0 of the first PCD3.M6880.
Primary device name
The name of the PCD3.M6880 Primary device. The default is “1-Primary”.
Press the “...” browse button to select an existing PCD3.M6880 device.
Primary device symbol file name
For “Separate symbol files” only. The name of the global symbol file that de
-
fines the media transferred between CPU0 and CPU1 of the Primary device.
This is shown as “To Red (Secondary)” in the picture above. The default name
is”ToRedSymbolsSecondary”.
Secondary Device (CPU0)
This is CPU0 of the second PCD3.M6880.
Secondary device name
The name of the PCD3.M6880 Secondary device in the PG5. The default is
“2-Secondary”. Press the “...” browse button to select an existing PCD3.M6880
device.
