Saia-Burgess Controls AG
User Manual Standby System
│
Document 27-645
│
Edition E
NG 02
│
2017-04-26
Creating a Standby System Project in PG5
Diagnostic
2-1
2
2
Configuration and Programming
2.1
Creating a Standby System Project in PG5
The Saia PG5
®
has many features to help you create a standby system project. It
will create the three standby devices for you (primary, secondary and redundant),
and creates the symbol files for defining the data to be exchanged between the
CPUs.
1. Create a new Project
Use Project Manager’s “Project / New Project” command to create a new project.
Check the “Create Device” option.
A single PG5 project can contain one standby system (one primary and one
secondary device). If you have more than one standby system on the same
network, then you must create a new PG5 project for each standby system.
If you are using Ether-S-Bus to communicate between the PCDs of two or more
standby systems on the same network, then you can use the Export and Import
features of the “TCP/IP Settings Table” window to transfer the settings between the
projects.
