SBC PCD1.M2220-C15 Manual Download Page 43

Page: 43 / 81

Hardware manual PCD1.M2220-C15 │ Document 27-640 – Version ENG03 │ 2020-03-25

Saia-Burgess Controls AG

Communication interfaces

5-1

Using the SBC S-Bus

Communication interfaces

The term “communication interface” shall be called “port” for the sake of simplicity

in the rest of this manual.

5.1

Using the SBC S-Bus

The SBC S-Bus stands for the proprietary communication protocol of the Saia

PCD

Read more about this in the manual “26-739_DE_Handbuch_SBC-SBus.pdf”.

The SBC S-Bus is essentially designed for communication with engineering and de-

bugging tools and to connect the management levels/process control systems.

It is not suitable or approved for connecting the field devices of other manufacturers.

An open, manufacturer-independent field bus is the purpose here.

Summary of Contents for PCD1.M2220-C15


















































































Search results

Summary of Contents for PCD1.M2220-C15

Reviews:

Related manuals for PCD1.M2220-C15

Brands by name

Popular brands

SBC PCD1.M2220-C15, Manual

Search results

Summary of Contents for PCD1.M2220-C15

Reviews:

Related manuals for PCD1.M2220-C15

Brands by name

Popular brands