PRODUCT MANUAL
Direct Connect Phone Recorder : SB-TRX20
Page 9
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
POWER ON
You may now turn on the recorder using the
Power Switch. A white light will appear near
the power switch as it starts up.
Your datestamp is now being set using the
settings you set earlier.
The white light will go off when it has finished
starting. The red light will again appear on the
other side of the device.
You can put the bottom cover back on the
recorder.
The red status light will remain ON. It will go off, and the white light will appear during
recording. Your recorder will start recording immediately when the phone is picked up.
If you have a cordless phone with additional units, the recorder WILL record from all
units.
The recorder does receive power from the phone line. However, it is good practice to
charge it fully via the USB cable occasionally.
The white light will blink if the battery is running low. Please turn OFF and recharge
fully using the USB cable if this happens.
