ENGLISH
23
SAunA mAintenAnce
AFter eVery SAunA SeSSion:
9
It is recommended to use bench towels during sauna session to prevent sauna
benches getting dirty.
9
After sauna session, leave heater on for 30 minutes so sauna will dry faster. After
that, open air vents or sauna door.
9
Empty pail from water
At leASt 1 -4 timeS per yeAr:
9
Remove heater stones. Clean stone dust and crumbs from bottom of the heater. Re-
pile stones and replace disintegrated ones.
9
Check heating elements. If there is any cracks or elements are bent, replace all ele-
ments. Do not replace only one.
9
Wash sauna surfaces with warm water and multi-purpose detergent. Use soft brush.
Wash sauna benches, ceiling, floor and walls. Do not use detergent which includes
ammonia or chlorine. Rinse surfaces with cold water and ventilate sauna room well.
If needed, protect wood surfaces with wood treatment oil. Read carefully the in-
structions of wood treatment oil from product packaging.
9
If sauna benches are not getting clean after washing, sand the benches with sand-
paper. Protect benches with wood oil. Do not heat the sauna room straight after
treatment.
9
If there is calcium stains or other dirt on the heater cover, clean it with mild soap
water. You can also use SAWO Decalcifying solution for washing the stains. Dry after
wash.
9
Clean glass surfaces with window cleaning agent or dish soap. Rinse well and dry
with a squeegee or a dry cloth.
9
Check screws (door, sauna benches, railings). Tighten up if necessary.
9
Clean the floor drain.