ENGLISH
8
scent Pump
Before switching scent pump on make sure there is enough aroma in
the aroma container. Never run the scent pump dry.
Scent pump can be operated in “On” mode only. In order to switch
scent pump on/off short press “Fan/Scent” button. The Scent pump is
allowed to be turned on only when the water in the tank is boiling.
Each time the scent pump is switched on the interval of the scent pump
functioning is displayed. Interval can now be changed by pressing “up”
or “down” arrow buttons between 1 (scent pump is activated every 20
mins) and 20 (pump on continuously). If no keys are pressed within 5
seconds, the previously displayed value will be shown again and the
scent pump setting is saved.
If scent pump is on when the session time expires or the steam
generator is turned off by pressing “power” button, scent pump will
turn off too. Scent pump “on” and “interval” settings are saved and
pump starts automatically on the next session.
To switch off the scent pump short press “Fan/Scent” button in “On”
mode.
When the aroma oil is changed, check that the pipeline is not broken
or it does not leak. It is also recommended to wash the fragrance
container between changes, especially when using different fragrances.
The pump is easy to refill quickly: short press “Fan/Scent” button in
“On” mode to activate interval value display. Press and hold “Up” arrow
button to reach max. value 20 and scent pump will run continuously. It
will take about 10 seconds for every 1 meter of pipeline for aroma liquid
to reach the pump. As soon as the aroma liquid has reach the pump
reset the pump functioning interval as preferred.
Use only fragrances meant for steam generator use. Follow the
instructions in the fragrance packing.
Demand button
A separate demand button can be installed on any desired location
including inside the steam room. Press of the demand button will
immediately release extra steam for 30 seconds.
Pressing the “Demand” button when the steam generator is in “Off” or
Standby” mode will switch the control unit to “On” mode.
switching between Different Modes
1. Press On/Off button for more than 3 seconds.
2. Press On/Off button or demand button.
3. Press On/Off button for more than 3 seconds.
4. Press Standby button.
5. Press On/Off button or Standby button or when the
session time expires.
6. Press On/Off button or Standby button or demand
button.
7. Press On/Off button for more than 3 seconds or
when the drain time expires.
8. Press Standby button for more than 3 seconds or
when the session time expires.
