Sawgrass SG1000EU, User Manual

Page: 9 / 129

Introduction – Read This First | 2
Important Notice
In no event will Sawgrass be liable for direct, indirect, special, incidental, or consequential
damages as a result of handling or operating the printer.
For good output quality, Sawgrass recommends that only genuine Sawgrass ink from
Sawgrass be used.
Sawgrass shall not be responsible for any damage or expense that might result from the
use of parts other than genuine parts from Sawgrass with the printer.
User's Notes

High temperatures inside the printer can cause a breakdown. Do not lean anything
against the vent or block it in any way.

Warm air from the vent is normal and not a cause for concern.

Do not leave the top or right front cover open. If you do, dust or other matter might get
inside the printer, and this will reduce print quality.

During printing, do not move the printer or open its covers.

Do not open the top or right front cover during printing. If you do, printing will stop.

During printing, do not pull out a tray. Printing will stop and the paper will jam.

Do not touch the feed belt, ink tubes, paper pressing board, or toothed rubber belt.
Also, take care not to catch cables or ink tubes with your sleeves.