【How to Replace Cooling Unit】
1. Remove the door (Fig.1)
Open the door and take out the basket.
Remove four screws which hold hinges. (Fig.1-①)
2. Remove the motor cover. (Fig.2)
Remove two screws of motor cover. (Fig.2-①)
Remove two screws of case cover assy. (Fig.2-②)
3. Take out the power supply. (Fig.3)
Cut the fastener. (Fig.3-①)
Pull out five couplers. (Fig.3-②)
Remove two screws of power supply. (Fig.3-③)
Take out the power supply. (Fig.3-④)
7. REPLACING PARTS
16
Fig.2
Fig.3
②
①
①
③
DOOR
Fig.1
14mm
14mm
WORK TIPS
When re-installing for door and hinges, please be care with placing position
of hinge height. Position must be 14mm from the cabinet.
(Please see reference picture in below)
After installation of door, please make sure for interior light not leak from
side of door.
If it's possible to see the light, please adjust height of hinges.
MOTOR COVER
CASE COVER ASSY
④
③
②
①
POWER SUPPLY
GROUND CORD
②
Summary of Contents for 0642 032 0310
Page 10: ... MT35F MT45F 3 PART NAME 7 ...
Page 23: ......
