6
7
Filter Assembly
Attach Inlet and Drain Bulkheads
Attach Feet
Follow the instructions below to pre-assemble filter before installation. Set aside internal
components for later installation.
To attach inlet and bottom drain bulkheads put the gaskets and large side
of the bulkheads on the inside of the filter housing. Install the lock nut on
the outside with the smooth surface facing the filter housing. Lock nuts
are reverse threaded - tighten using a
counterclockwise
motion.
bulkhead gasket
lock nut
1.5” 90
º
inlet
threaded elbow
Filter
Cutaway
View
bulkhead gasket
lock nut
1
2
Attach stabilization feet to skimmer using six 1” ss screws provided.
stabilization feet
drain plug
1” ss screws
