screw large
bulkhead side
with gasket
through liner
and filter
filter
interior
Side View
liner
11
Instructions for attaching waterfall liner directly to front of the filter.
(For remote installation & pipe discharge options see page 11).
Attach the outlet bulkhead with the
gasket and large side of the bulkhead on
the
outside
of the filter housing. (Note:
This is the opposite of the inlet bulkhead
installation performed on page 6)
Pull liner up flush against face of filter.
Hold liner flat against filter and find the
center of hole.
Carefully cut a hole to the size of outlet
with a utility knife.
Attach bulkhead. See diagram below.
1
2
3
4
10
(Model F200)
Install Versatile Filter
