Savin G1619, Facsimile Reference Manual

Page: 31 / 176

Immediate Transmission
21
2
Immediate Transmission
Immediate Transmission is conve-
nient when:
• You wish to send a document im-
mediately as it is scanning.
• You wish to quickly check whether
you have successfully connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the
{{{{
Start
}}}}
key. The mes-
sage is scanned and transmitted page
by page without being stored in
memory.
Note
❒
You can only specify one destina-
tion for Immediate Transmission.
❒
You can set whether the machine is
in Memory Transmission mode or
Immediate Transmission mode
right after the power is turned on
with the User Parameters.
❒
The machine does not redial with
immediate transmission.
AAAA
Check that the Memory Trans-
mission indicator is not lit.
If it is lit, press the
{{{{
Memory Trans.
}}}}
key.
BBBB
Set your original.
Reference
p.13 “Setting Originals”
CCCC
Select any scan settings you re-
quire. See p.24 “Scan Settings”.
DDDD
Dial.
If you make a mistake, press the
{{{{
Clear/Stop
}}}}
key, and then enter the
correct number again.
Reference
p.26 “Dialing”
See Chapter 3 “Chain Dial” in
the Advanced Features manual.
EEEE
Press the
{{{{
Start
}}}}
key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.