Setting Paper on the Bypass Tray
15
1
CCCC
Gently insert paper face up into
the bypass tray until the beeper
sounds.
1.
Extender
2.
Paper guides
Note
❒
The beeper will not sound if it is
turned off. Gently insert paper
until it stops.
❒
Do not stack paper over the lim-
it mark, otherwise a skewed im-
age or misfeeds might occur.
❒
Open out the extender to support
paper sizes larger than A4
L
,
8
1
/
2
"
×
11"
L
.
❒
Fan the paper to get air between
the sheets to avoid a multi-sheet
feed.
❒
When setting an OHP transpar-
ency, make sure that its front
and back sides are properly po-
sitioned.
❒
Select paper type when printing
onto OHP transparencies or
thick paper (over 127.9 g/m
2
).
For details, see p.17 “Setting
thick paper or OHP transparen-
cies”.
DDDD
Select the paper size.
Important
❒
Set the paper size and orienta-
tion using the display panel
when printing on paper from
the bypass tray.
❒
If bidirectional communication
is disabled, set the paper size
and orientation in the bypass
tray using the printer driver, ac-
cording to the setting made on
the display panel.
Note
❒
Thick paper and OHP transpar-
encies are delivered face up on
the top of the preceding page;
therefore, the prints need to be
rearranged into the correct or-
der. To avoid this, select
[
Reverse
order print
]
in the RPCS printer
driver settings to deliver the
prints in the correct page order.
Reference
For printer driver settings, see
the printer driver Help.
For details about setting custom
sizes, see p.16 “Setting custom
size paper”.
A
Press the
{{{{
User Tools/Counter
}}}}
key on the control panel.
B
Press
[
System Settings
]
.
AGP005S
AEU043S
ThemisC1EN-Print-F3_FM.book Page 15 Friday, December 24, 2004 1:20 PM