Saville TraveLite TMX-1700XXL/2, User Manual

Page: 15 / 32

EN – 15
ENGLISH
Menu operation
IMAGE
XGA60
opt.
INSTALLATION
opt.
XGA60
INSTALLATION
opt.
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
XGA60
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
30 min
OFF
Basic operation
Several settings can be adjusted using the menu.
Example: Auto power off time setting
1. Press the MENU button.
2. Press the
$
or
%
button to select
INSTALLATION.
3. Press the ENTER button (or
}
button).
4. Press the
{
or
}
button to select AUTO
POWER OFF.
5. Press the
$
or
%
button to adjust the auto
power off time.
6. Exit the menu by pressing the MENU button
several times.
Important:
• When the MENU button doesn’t function,
unplug the power cord from the wall outlet.
Wait about 10 minutes, plug the power cord in,
and try again.
• After selecting the items marked with , press
the ENTER button.
IMAGE CONTRAST ± 30
BRIGHTNESS
COLOR MATRIX
± 30
sRGB ON , OFF
STANDARD
LOW
HIGH
USER
COLOR TEMP.
COLOR ± 10
TINT
±
10
SHARPNESS ± 5
GAMMA MODE AUTO, DYNAMIC, STANDARD, THEATER
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R ± 30
BRIGHTNESS B ± 30
EXPAND MODE EXPAND, REAL
AUDIO MODE COMPUTER, VIDEO, COMPUTER VIDEO, MUTE
INSTALLATION
OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON
ON , OFF
RESET ALL OK
AUTO POWER OFF
ON , OFF
FEATURE MENU POSITION 1 (Upper left), 2(Lower right)
IMAGE REVERSE
SPLASH SCREEN
BLACK, IMAGE MUTE MODE
BLUE, BLACK, IMAGE BACK COLOR
STANDARD, LOW LAMP MODE
OFF, CENTER, UPPER, LOWER ANAMORPHIC
DISPLAY INPUT , MENU ACCESS , SPLASH ID SCREEN PASSWORD FUNCTION
ON , OFF SCART INPUT
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
LANGUAGE , English, Español, Deutsch, Français, Italiano, , , ,
VIDEO
YELLOW ± 30
RED ± 30
BLUE ± 30
CYAN ± 30
GREEN ± 30
MAGENTA ± 30
RGB-TINT ± 20
COMPUTER
USER
OFF
SIGNAL HORIZ.POSITION
HOLD
0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 31
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - 63
CLAMP WIDTH 1 - 63
SHUTTER (L)
0 - 20
SHUTTER (U) 0 - 20
SHUTTER (RS) 0 - 20
SHUTTER (LS) 0 - 20
VERT. SYNC.
AUTO, OFF
*5
*3
*3
AUTO , OFF CINEMA MODE
*3
*3 *3
*3
*3
*3
*5
*5
ON
BEGIN 0 - 15
END 0 - 15
OFF
COMPUTER INPUT
RGB, YC
B
C
R
/ YP
B
P
R
*5
*5
OFF, 5, 10, 15, 30, 60 min
OK
OK
UNLOCK OK
LOCK
*1
*1
*1
*2 *1
*1
*3
*4
*2
IMAGE CAPTURE
SETUP
x1, x2, FULL
GLAY, RED, GREEN, BLUE, BLACK, WHITE, RED 50%, GREEN 50%, BLUE 50%
CAPTURE
BACK COLOR
SIZE
GO
(Displayed only when the source is VIDEO or S-VIDEO.)
(Displayed only when the source is VIDEO or S-VIDEO.)
(These items are not available when the input
source is COMPUTER.)
* 1: Not available when sRGB is set to ON.
* 2: Not available with certain signals.
* 3: Not available when the source is a VIDEO
or S-VIDEO signal.
* 4: Available only when the input signal is TV60 or 480i.
* 5: Setting range differs depending on the input signals.