145
To change the scan data format, scan one of the following eight bar codes correspond-
ing to the desired format. If using this parameter do not use ADF rules to set the
pre
fi
x/su
ffi
x.
To set values for the pre
fi
x and/or su
ffi
x, see
Pre
fi
x/Su
ffi
x Values
.
Note
- If you need the pre
fi
x or su
ffi
x under “
Data Storage Mode
” follow the steps below:
1 - Read
<Data As Is>
fi
rst, then read the
Transmit Memory Data
barcode to upload the
data in the scanner’s memory.
2 - Read the
Clean Memory Data
barcode to clear the data in memory.
3 - After that you may go on to enable custom pre
fi
x and/or su
ffi
x again.
< Data As ls >
<DATA> <SUFFIX 1>
<DATA> <SUFFIX 2>
Data Transmission Format
Miscellaneous Scanner Options
Table of Contents
