Savaria 001103, Owner'S Manual

Page: 8 / 16

8
M2LIFT Owner’s Manual Part No. 001103, 28-m08-2018
5 Pressing the Emergency Stop button during travel will stop the lift
immediately and activate the alarm. The Emergency Stop overrides the
landing station controls. Pull the Emergency Stop out to return the lift to
normal operation.
6 If the gate is locked at a landing for more than 10 seconds, you can press the
Up button to unlock the gate.
Operating from the Landing Station Controls
Figure 3 shows the different types of landing stations (hall calls).
Figure 3
To operate the lift from the landing (call/send) station controls:
1 Insert the key into the key switch and turn it to the ON position to activate
the operating buttons.
2 Press the appropriate landing button to move the platform to the desired
landing. Note that the lift will not move if the gate is open.
3 When the lift reaches the landing, the door will unlock automatically. If you
need to re-open the door after the delay, turn the key on and press the call
Up button again to unlock the door.
4 To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
Surface Mount
Key switch
Landing
buttons