7
Part No. 001103, 28-m08-2018
M2LIFT Owner’s Manual
3. OPERATION
Attendant Operation
•
The attendant shall only operate the lift from the call station located at
the lower landing if the lift is unenclosed.
•
The attendant shall have full view of the floor area under the lift and of
the rider at all times.
•
If the lift is enclosed, the lift can be operated from the upper landing
provided the operator has a view of the rider at all times.
•
During attendant operation, the car directional controls must not be
operational.
Operating from the COP Controls
Figure 2 shows the car operating panel (COP).
Figure 2
To operate the lift from the COP controls:
1
Insert the key into the key switch and turn it to the ON position to activate
the operating buttons.
2
Apply constant pressure on the Up/Down button (as required) to move the
platform to the desired landing. Note that the lift will not move if the gate is
open.
3
When the lift reaches the landing, the gate will unlock automatically. If you
need to re-open the door after a delay, turn the key to the ON position and
press the call button again to unlock the gate.
4
To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
Emergency
Key Switch
Up/Down
Stop
Summary of Contents for 001103
Page 15: ......
