Savant 4K HDR HDBaseT Matrix Switcher Deployment Guide
Copyright © 2020 Savant Systems, LLC
009-1893-01 | 200102
3 of 27
Important Safety Information - Read First
Before installing, configuring, or operating any equipment, Savant recommends
that each dealer, integrator, installer, etc. access and read all relevant technical
documentation. Savant technical documentation can be located by visiting
Savant.com.
Read and understand all safety instructions, cautions, and warnings in this
document and the labels on the equipment.
Safety Statements
All safety instructions below should be read, understood, and applied under all
relevant circumstances when working with this equipment.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of any polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If any provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect any power cord from being walked on or pinched; particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11.
Use only attachments/accessories specified by the manufacturer,
following all relevant safety precautions for any such attachments/
accessories.
12.
Disconnect any outlet powered apparatus from its power source during
lightning storms or when unused for long periods of time.
13.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a damaged
power supply cord or plug, liquid being spilled or objects having fallen
into the apparatus, the apparatus being exposed to rain or moisture,
apparatus having been dropped, or other failure to operate normally.
14.
To completely disconnect equipment from AC mains power,
disconnect the power supply cord plug from the AC receptacle.
15.
For applicable equipment, use the included power cord with the
grounding prong intact to insure proper grounding of the device.
16.
For any hardwired or fixed in-wall apparatus, carefully follow all wiring
diagrams and instructions. All electrical wiring and servicing should be
performed by a properly licensed electrician.
Safety Classifications In this Document
NOTE
:
Provides special information for installing,
configuring, and operating the equipment.
IMPORTANT!
Provides special information that is critical to
installing, configuring, and operating the equipment.
CAUTION!
Provides special information for avoiding situations
that may cause damage to equipment.
WARNING!
Provides special information for avoiding situations
that may cause physical danger to the installer, end
user, etc.
Electric Shock Prevention
ELECTRIC
SHOCK!
The source power poses an electric shock hazard
that has the potential to cause serious injury to
installers and end users.
ELECTRICAL
DISCONNECT
:
The source power outlet and power supply input
power sockets should be easily accessible to
disconnect power in the event of an electrical hazard
or malfunction.
Weight Injury Prevention
WEIGHT INJURY!
Installing some Savant equipment requires two
installers to ensure safe handling during installation.
Failure to use two installers may result in injury.
