Savant HRX-4KVLC100, Deployment Manual

Page: 18 / 27

Savant 4K HDR HDBaseT Matrix Switcher Deployment Guide Copyright © 2020 Savant Systems, LLC
009-1893-01 | 200102 18 of 27
6.7. Settings Tab
SLN-88VLC4K
LOGOUT
STATUS NETWORK LOGGING FIRMWARE INPUT & OUTPUT SETTINGS
RESET ALL SETTINGS TO DEFAULT
RESET TO DEFAULT
SAVE SETTINGS
LOAD SETTINGS
EDID SETTING
ENTER
CEC SETTING
Output
Auto Control (Minute)
CEC Control
DISPLAY ON
DISPLAY OFF
HDMI 1
OFF
A
B
C
D
E
F
G
A
Reset to Default
Clears all settings and resets the device to its factory
defaults.
B
Save Settings
Collects all settings and allows a text file to be
saved. This can be used as a backup or to be
deployed at a different location.
C Load Settings Loads settings from a saved text file.
D Output Selection Selects the output for configuration and control.
E
Audio Control
(Minute)
Select a time in minutes after which a Power Off
command will be sent to the display if no video
signal is detected. When OFF is selected, no such
command will be issued.
F
Enter EDID
Settings
Opens the EDID settings menu. See the EDID
Settings section below for details.
G
CEC Control Buttons to power on or off the connected display.
EDID Settings
EDID SETTINGS
Output
HDMI 1
READ
Input
Fixed 4K30 2.0CH PCM Audio with SDR APPLY Fixed 4K30 2.0CH PCM Audio with SDR APPLY
Fixed 4K60 5.1CH Encoded Audio with HDR
APPLY
Fixed 4K60 5.1CH Encoded Audio with HDR
APPLY
Fixed 4K30 7.1CH Encoded Audio with HDR
APPLY
Smart EDID
APPLY
Smart EDID
APPLY
Smart EDID
APPLY
HDMI 1 HDMI 2
HDMI 3 HDMI 4
HDMI 5 HDMI 6
HDMI 7 HDMI 8
A B
C D
A
Output Selection Drop-down menu to select output.
B
View EDID read
Displays the actual EDID read for the selected
output. See the example EDID read below.
C
Input EDID
Selection
Drop-down menu to select the desired EDID. See list
of available EDID below.
D
Apply
Applies the change to the input’s EDID from the
EDID selection.