TVO-S-BA-e-1710
5
Display of preset cycles
Setting of the number of cycles to be completed by
the test stand using the “Counter –”, “C” and
“Selection of counter position” buttons
(preset value indicator)
Display of completed cycles
Display of the number of completed cycles
(actual value indicator)
Reset button:
Resetting (0000) of the preset value display
The range of movement of the test stand is determined by the top and bottom limiting
ring. The rings must be set before each test.
7 Check before use
After receiving the equipment please check it for transport damage. Inspect the
transport packaging, metal enclosure, all other elements and the test stand itself to
make sure that there is no damage. If any defects are identified, please contact
SAUTER GmbH immediately.
8 Applications
TVO-S test stands have been designed to ensure trouble-free mounting of the major-
ity of SAUTER force measuring devices. The test stands have a very broad range of
applications and are suited to manual operation. In addition, they make it possible to
automate a range of functions such as stepless speed adjustment, and automatic
lifting and lowering with a set number of repetitions (up to 1,000). TVO-S test stands
are suitable for material testing in the metal, plastic and textile industries. They are
compatible with SAUTER software (AFH) which makes it possible to control the
movement of the test stand via a computer. Other software functions include re-
cording of the force, time and distance covered. Operation with the emergency stop
option is only possible with an FH force measuring device, as only this model offers
setting functionalities that ensure ongoing protection of the test stand against over-
load, e.g. by programming the parameter STOP.
•
Choose an appropriate test stand depending on the desired maximum force.
The force measuring device used should also be suited to the selected maxi-
mum force. Please exercise particular caution when setting the travel distance
(risk of damage to the force measuring device).
•
Never attempt to open, repair or modify the equipment by yourself. In the case
of defects, please contact SAUTER GmbH.
•
The test stand has not been designed for operation in humid conditions. Al-
ways take steps to ensure that no moisture penetrates into the equipment
housing.
•
Do not use any sharp objects for pressing the buttons.
•
To set the travel path, use the limiting rings to ensure accurate setting and
avoid damage to the test stand and the force measuring device.
