sauter FH 10 Instruction Manual Download

Page: 2 / 17

FH-BA-e-2020

SAUTER FH

V. 2.0 01/2020

Instruction manual digital force gauge

Congratulations on purchasing a digital force measuring device with internal or external
measuring cell from SAUTER. We hope you will enjoy your quality measuring device
with a wide range of functions. Please do not hesitate to contact us if you have any
questions, requests or suggestions.

Table of contents:

Introduction .................................................................................................... 3

Scope of delivery ........................................................................................... 3

Technical data ................................................................................................ 4

3.1

Technical data FH with internal loadcell up to 500N ............................................................ 4

3.2

Technical data FH with external load cell up to 500N ........................................................... 5

3.3

Technical data FH with external load cell from 1kN ............................................................. 6

3.4

Technical data external load cell (from 1kN) ......................................................................... 7

Battery operation / power supply ................................................................. 8

Display indication .......................................................................................... 8

Control buttons .............................................................................................. 9

Assignment of the RS 232 data interface .................................................. 12

7.1

Interface protocol ................................................................................................................... 13

Warnings ...................................................................................................... 13

Adjustment instruction FH .......................................................................... 16

Technical drawings ...................................................................................... 17

Summary of Contents for FH 10


















Search results

Summary of Contents for FH 10

Reviews:

Related manuals for FH 10

Brands by name

Popular brands

sauter FH 10, Instruction Manual

Search results

Summary of Contents for FH 10

Reviews:

Related manuals for FH 10

Brands by name

Popular brands