EQJW146F001 EN
29
Communication
All communication modules are designed for operation at the communication interface
coordinated. The interface properties cannot be parameterized.
Property
Setting
Baud rate
19200 Baud
Data bit, parity, stop bit
8 bits, none (no), 1 stop bit
For more details on the Communication accessory, refer to the Communication Connection
Manual.
7.1 Memory module
The use of a memory module (0440210010) is particularly useful for transferring all set
data from one EQJW146F001 controller to several other EQJW146F001 controllers
memory module (0440210010).
The memory module is connected to the RJ-45 socket on the side. After connection, “73
SP” is shown in the controller display. If the memory module already contains data from
another controller EQJW146F001, the display “SP 73” can be called up by turning the
control knob.
– Confirming the display “73 SP” by pressing the control knob leads to the transfer of the
controller setting into the memory module.
– Confirming the display “SP 73” by pressing the control knob leads to the transfer of da-
ta from the memory module to the controller.
During the data exchange, the bar graph in the display is used as a running light.
After successful data transfer, “I.O.” is displayed. Afterwards, the connection between the
controller and the memory module/minimodule can be disconnected.
