O
NCE THE MACHINE HAS BEEN SET UP PROPERLY
,
START THE ENGINE AS FOLLOW
:
Press 2 or 3 under the rubber cap, as shown below
Close the starting bail arm lever, as following picture.
Pull on the recoil starter handle until you can feel resistance and then pull harshly.
If the engine is in hot standby mode, the engine can start directly.
Do not start the motor in tall grass.
While mowing, lay the connection cable safely on footpaths and on areas which
have already been mown.
Press the drive rod. The lawnmower runs without any intervention at a rate of about
3.6 km / h.
Release the drive rod off, and the mower stops.
