background image

8

1.2.2. Sauna climate control

The volume of air circulation generated by the device is controlled by the rotary switch on the bottom left on the front of the sauna climate device. The switch has 

four positions and can be rotated clockwise or anticlockwise. If the dash on the switch button points to the left, the fan of the sauna climate device is turned off, 

the airflow speed increases by turning the switch clockwise; there are 3 speed levels. To regulate the steam temperature, there is a cooling valve on the left side of 

the flue socket behind the sauna climate device’s area for stones (

Figure 1

). We recommend keeping it 1/3 open, this setting is usually the best. If you want to cool 

down the steam more, try opening the valve gradually.

1.2.3. Using Himalayan salt balls

Himalayan salt balls are included in the sauna climate device set. The use of salt balls in the device is strictly optional and does not affect the basic function of the 

device. If salt balls are used with the sauna climate device, the balls should be placed in the recesses between the air outlet grille and the fan so that they do not 

disturb the free rotation of the fan. To install or remove salt balls, remove the air outlet grille and place the salt balls in the recesses (

Figure 5

).

Do not use / start up the device if the salt balls have gotten into the fan housing! After installing or removing the salt balls, put the air outlet grille back.

NB! Do not use the sauna climate device without the grille!

NB! The use of third party salt balls is not covered by the warranty!

1.3. Throwing a steam

The air in the sauna becomes dry when heated. Therefore, you need to throw water on the rocks to achieve the suitable humidity level. The effects of heat and 

steam on people are different, testing the different settings of the SAUNUM’s sauna climate device will help you find the right combination of temperature and 

humidity.

Attention! The maximum capacity of the ladle should be 0.2 litres. The amount of water thrown at a time on the heater must not exceed 0.2 litres, if too much 

water is poured on the stones at a time, only a part of it is evaporated and the rest may get sprayed on the bathers. Never throw water on sauna stones when 

someone is in the immediate vicinity of the heater, as hot steam can burn their skin.

Attention! The water thrown at the heater must meet the requirements for clean domestic water. 

Only perfumes specially designed for sauna can be used in the water. Follow the instructions on the package.

NB! Do not pour water into the ventilation openings of the sauna climate device!

Summary of Contents for H-1/6


























Reviews: