13
SETUP
12
SETUP
1. ATTACH CLAMPS
Install Clamps into Light Panel's Bracket Slots as shown:
1. Rotate TurnKey counter-clockwise to loosen until bare end of Clamp
Strap is released from TurnKey screw.
2. With TurnKey pointed toward Light Panel, insert bare end into
Bracket Slot.
3. Close Clamp by inserting bare end into TurnKey Screw and rotating
TurnKey clockwise.
2. ASSEMBLE STOOL
1. Connect leg panels by aligning middle grooves and pushing
together.
2.
Place seat plate upside-down on floor, with X-shaped groove facing
up.
3.
Insert flat end of connected leg panels into matching X-groove.
Gently push/tap legs into place.
4. flip stool over and stand up on legs. Sit on stool or grasp stool by
seat plate and fully insert legs into place by tapping feet against
floor.