13
English
Rewind button
Dust barrel release button
On/off button
Speed control button
ASSEMBLING VACUUM CLEANER
BUTTON FUNCTION INTRODUCTION
1.
Attaching the Flexible Hose into the vacuum connect the
flexible hose into the air intake duct, push in until you hear a
“click” sound, indicating it is in its locked position.
2.
Fitting the tube to the curved wand/hose extension. Push the
tube into the curved wand/hose extension.
3.
Fitting the floor brush to the tube. Push the tube into the floor
brush. Adjust the tube to the desired length.
1.
Insert the power plug into the wall outlet.
2.
Press the power on/off button located on the unit to turn the vacuum cleaner “on”.
3.
To rewind the power cord, press the cord rewind button with one hand and guide the power cord
with the other hand to ensure that it does not whip causing damage or injury.
USE AND FUNCTION
NOTE: Always remove the power plug from the wall outlet before assembling or removing
accessories.
NOTE: Once all attachments are in place, unwind a sufficient length of cable and insert the
plug into the wall outlet. A yellow mark on the power cord shows the ideal cable length. Do
not pull the power cord beyond the red mark.
