Separate the EXTENSION SLIDES (W) from the EXTENSION RAILS (V) as shown in the upper diagram. Be prepared, the parts
are greasy.
Fasten four EXTENSION RAILS (V) to the DRAWER UPRIGHTS (I). Use eight GOLD 5/16" FLAT HEAD SCREWS (II).
NOTE:
For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to find the other hole that lines up with the hole in the UPRIGHTS. Turn a SCREW into this
hole.
Push the black lever in and pull the SLIDE from the RAIL.
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
II
Open end
Open end
2
2
S
te
p
V
V
V
V
V
W
I
I
Surface with
HIDDEN CAMS
Surface without
HIDDEN CAMS
Finished edge
Finished edge
Page 6
www.sauder.com/services
413998
