NOTE: You will need someone's help with Steps 10 and 11.
Position the TOPS (J, K and L) as shown with the holes closer to the inside edge. Follow the diagram.
Fasten a SLAT (G) to the TOPS (J, K and L). Use eight BLACK 1-1/8" PAN HEAD SCREWS (FF).
Fasten the remaining SLATS (G) to the LONG TOPS (J and K). Use sixteen BLACK 1-1/8" PAN HEAD SCREWS (FF).
10
10
S
te
p
If the TOPS (J, K and L)
have an unfi nished suface,
it should be facing up.
The holes in the TOPS (J, K and L)
must be closer to the inside edge.
G
G
G
G
J
K
L
Page 14
www.sauder.com/services
413998
BLACK 1-1/8" PAN HEAD SCREW
(24 used in this step)
FF
Rounded
edge
G
Rounded
edge
