With someone's help, move the Bed close to its final location in your room.
If you purchased the 411840 Full/Queen Headboard, assemble it and fasten it to the HEAD END (A). Use four SILVER 1-1/4"
BOLTS provided with the Headboard.
With someone's help, move the 413998 Bed and 411840 Headboard against the wall into its final location.
Following the instructions at the top of this page, carefully turn over the TOP/SLAT assembly and lower it onto the Bed with the
SHORT TOP (L) at the foot end.
Fasten the SLATS (G) to the LARGE CENTER UPRIGHTS (E). Use ten BLACK 1-7/8" LARGE HEAD SCREWS (CC).
11
11
S
te
p
Foot
end
411840 Full/Queen Headboard
Back surface
G
G
G
G
G
BLACK 1-7/8" FLAT HEAD SCREW
(10 used for the SLATS)
CC
E
E
A
SILVER 1-1/4" BOLT
(4 used for the Headboard)
Page 15
www.sauder.com/services
413998
L
1
2
3
Caution
Two person
lift required
Carefully lift and
lower onto the bed.
Lift here.
