Step 20
å
NOTE: You will lift the DOOR by holding onto the ends of the DOOR TRACK
TUBE while the DOOR hangs from the TUBE.
å
NOTE: A corner of the unit is cut out to show part of the assembly.
å
Place the DOOR TRACK TUBE (111M) with the DOOR (O) onto the DOOR
TRACK SUPPORTS (105M).
å
Now, fasten the DOOR TRACK TUBE (111M) to the two outer DOOR TRACK
SUPPORTS (105M). Use two BROWN 1/2" PAN HEAD SCREWS (125S).
å
Carefully pull the bottom of the DOOR (O) out at an angle. Then, push up
on the RETAINING BARS (155M) on the bottom edge of the DOOR and
insert the RETAINING BARS into the DOOR TRACK (110M). Then, press
down on the RETAINING BARS.
å
See the next step for DOOR adjustments.
111M
BROWN 1/2" PAN HEAD SCREW
(2 used in this step)
125S
105M
110M
421191
www.sauder.com/service
Page 25
O
125S
125S
155M