å
Slide a SHELF MOLDING* (I) onto the notched edge of one of the SHELVES (E).
å
Repeat this step for the remaining SHELVES (E) and SHELF MOLDINGS (I).
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
in the ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (E) onto the METAL PINS.
å
*U.S. Patent No. 5,499,886
Step 22
421191
www.sauder.com/service
Page 27
(20 used)
2R
1R
E
E
E
E
E
A
C
B
Slide the SHELF MOLDING (I)
onto the notched edge.
These surfaces should be even.
I
E
Notched edge
The groove is
closer to this edge.
